BVHMY - PUROLITE NRW-37
- MSDS: BVHMY
- Manufacturer: BELMONT EQUIPMENT CO DIV OF CLEARY DEVELOPMENTS IN
- Product Name: PUROLITE NRW-37
- National Stock Number: 6810-01-370-4210
Product Identification
Product ID:PUROLITE NRW-37
MSDS Date:11/02/1992
FSC:6810
NIIN:01-370-4210
MSDS Number: BVHMY
Responsible Party
MADISON HEIGHTS, MI 48071
US
Emergency Phone: 215-668-9090
Info Phone: 313-588-7011
Cage: 0B6B2
Contractor
Telephone: (313) 588-7011
Cage: 0B6B2
Ingredients
68037-26-3).
Fraction By Weight: 40%
ION EXCHANGE RESIN, R4N+OH (CAS# 68441-30-5).
Fraction By Weight: 60%
Hazards
Routes of Entry: Inhalation:NO Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES:MECHANICAL IRRITATION.
Effects of Overexposure:NONE SPECIFIED BY MFG.
Medical Cond Aggravated by Exposure:NONE APPLICABLE.
First Aid
First Aid:EYES:FLUSH WITH WATER FOR 15 MINUTES.
Fire Fighting
Flash Point:NONE
Autoignition Temp:Autoignition Temp Text:427C
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, WATER, FOG.
Fire Fighting Procedures:WEAR MSHA/NIOSH APPROVED PRESSURE DEMAND
SELF-CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:NONE.
Accidental Release
Spill Release Procedures:RESIN BEADS ON FLOOR MAY MECHANICALLY CAUSE
FLOOR TO BE SLIPPERY. USE CARE TO AVOID FALLS. SWEEP UP AND
TRANSFER TO CONTAINERS FOR RECOVERY OR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MFG.
Handling
Handling and Storage Precautions:KEEP DRUMS AND PLASTIC BAGS SEALED TO
PREVENT DRYING OR MOISTURE LOSS. STORE BELOW 49C (120F) AND ABOVE
0C (32F).
Other Precautions:NONE SPECIFIED BY MFG.
Exposure Controls
Respiratory Protection:NONE.
Ventilation:NORMAL PLANT VENTILATION.
Protective Gloves:NONE.
Eye Protection:SAFETY GLASSES (ANSIZ 87.1).
Other Protective Equipment:NONE.
Work Hygienic Practices:WASH HANDS AFTER HANDLING.
Supplemental Safety and Health
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:N/NA
Spec Gravity:1.2
Solubility in Water:INSOLUBLE.
Appearance and Odor:AMBER SPHERICAL BEADS, ODOR-NONE.
Stability
Stability Indicator/Materials to Avoid:YES
CONCENTRATED NITRIC ACID OR STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:TEMPERATURES OVER 220C (428F).
Hazardous Decomposition Products:SO2, SO3, CO, CO2, STYRENE MONOMER,
DI-VINYL BENZENE.
Disposal
Waste Disposal Methods:THIS MATERIAL CAN BE DISPOSED OF AS ORDINARY
TRASH.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.